Struggling with your vape kit? You’re not alone. Whether you’re new to vaping or a seasoned user, vape kits can sometimes throw a curveball from no vapour to burnt tastes. At Royal Vapery, we know how frustrating this can be. That’s why we’ve put together this straightforward guide to help you fix common vape problems fast.
As part of our “How To Vape” series, this article focuses on vape kits those all in one devices perfect for beginners and pros alike. We’ll walk you through the most frequent issues, explain why they happen, and give you quick fixes. No jargon, just practical steps to get you puffing smoothly again. Let’s dive in.
No Vapour? Check These First
The most common gripe with vape kits is no vapour at all. It feels like your device has gone on strike. Don’t panic it’s often a simple fix.
First, ensure your battery is charged. Many vape kits have an LED indicator that flashes or changes colour when low on power. Plug it in with the right cable usually USB-C these days and wait 30 minutes. Royal Vapery tip: Always use the original charger to avoid battery damage.
Next, check if your pod or coil is properly seated. Vape kits rely on a snug connection for power to flow. Remove the pod, inspect for dirt or residue, give it a gentle clean with a dry cloth, and click it back in firmly. Hear that satisfying snap? You’re good to go.
If it’s still dry firing that harsh, empty hit, your coil might be spent. Coils in vape kits last 1-2 weeks with average use. Pop in a fresh one from Royal Vapery range we stock compatible replacements for all popular kits. Pro tip: Prime new coils by adding a few drops of e-liquid to the cotton before inserting. This prevents burning and gets vapour flowing instantly.
Leaking Pods: Stop the Drips
Leaky vape kits are a nightmare e-liquid everywhere, wasted juice, and sticky pockets. Why does it happen? Overfilling, poor storage, or worn seals.
Start by checking your fill level. Most vape kits have a side fill pod with a max line. Overfill it, and pressure builds, causing leaks. Empty excess liquid and wipe the pod’s base.
Store your kit upright. Lying it flat lets gravity pull e-liquid towards the coil and out through the mouthpiece. Keep it in your bag standing up, or use a protective case from Royal Vapery.
If leaks persist, the pod’s rubber seal might be damaged. Inspect and replace the pod. High-PG e-liquids are thicker and leak less try Royal Vapery’s nic salt range for kits like the Elf Bar or Lost Mary equivalents. Quick fix: Condensation inside the mouthpiece can mimic leaks. Blow gently through it to clear moisture, then dry with a tissue.
Burnt Taste: Rescue Your Hits
That acrid, burnt flavour ruins a good vape session. It’s usually a sign your coil is toast or you’re out of e-liquid. Low e-liquid is the top culprit. Vape kits draw juice automatically, so check your pod often. Refill before it’s empty aim to top up when half-full. Coil gunk builds up from sweeteners in e-liquids.
Switch to cleaner flavours like menthol or tobacco from Royal Vapery to extend coil life. Burnt hits also come from chain vaping. Give your kit 5-10 seconds between puffs for fresh juice to saturate the coil. Lower wattage if adjustable most kits auto-set this, but check your manual. Replace the coil or pod immediately. Royal Vapery stocks affordable packs, ensuring you’re never caught out.
Battery Dying Too Quick?
Vape kits promise all day power, but sometimes they fizzle out by lunch. Heat, overuse, or faulty batteries are to blame. Avoid extreme temperatures. Don’t leave your kit in a hot car lithium batteries hate heat above 40°C. Cool it down and recharge slowly. Screen brightness or constant firing drains power. Turn off auto-draw if available, or store in sleep mode.
If it’s a deeper issue, test with another battery if swappable. Royal Vapery’s kits come with reliable 500-800mAh batteries, but replacements are cheap and easy. Extend life by charging to 80% max and unplugging once full. Use high-quality cables to prevent slow charging.
Firing Issues: Won’t Hit When You Want
Your button won’t respond, or auto-draw feels sluggish. Annoying, right? For button-activated kits, clean the sensor. Lint or juice residue blocks it. Use a toothpick or compressed air gently.
Auto-draw kits rely on airflow. Clogged intake ports? Unscrew the pod, rinse under warm water no soap, and dry thoroughly for 30 minutes. Firmware glitches happen rarely, but a full recharge often resets them. If not, reset via the manual many kits have a 5-click button combo. Royal Vapery selects kits with reliable firing mechanisms. Still stuck? Our customer support is a message away.
Weak Vapour or Flavour
Mild clouds and faint taste disappoint. It’s often wattage, airflow, or e-liquid mismatch.
Adjustable kits? Crank up wattage slightly start at 10W increments. Fixed output ones might need a higher-resistance coil.
Airflow matters – close it for tighter draws more flavour, open for clouds. Experiment to suit your style. Thinner 50/50 e-liquids work best in most vape kits. Royal Vapery’s premium nic salts deliver punchy flavour without weak hits. Old juice loses potency. Freshen up with new bottles from our collection.
Overheating: Cool It Down
Hot vape kits scare users is it safe? Usually yes, but address it. Chain vaping generates heat. Pause between puffs. Blockages cause the coil to overwork. Clean everything. Faulty batteries overheat stop using and replace. Royal Vapery kits have built-in safety chips to cut power if too hot. Let it cool for 15 minutes.
Pod Not Recognised
Modern vape kits with screens flash “No Pod” or “Check Pod”. Pod chip mismatch or dirt. Re-seat firmly. Clean contacts with isopropyl alcohol on a cotton bud. Pods expire check dates. Royal Vapery pods are fresh stocked. Compatible pods only stick to originals for best results.
Maintenance Tips for Trouble-Free Vaping
Prevention beats cure. Here’s how to keep your vape kit humming:
- Clean weekly: Rinse pod, wipe connections.
- Store cool and dry.
- Use right e-liquid: Nic salts for MTL kits.
- Track coil life: Note fill dates.
- Update firmware if your kit supports it.
Royal Vapery’s starter kits come with guides. Browse our “How To Vape” section for more.
Choose Reliable Vape Kits from Royal Vapery
Tired of troubleshooting? Upgrade to quality. Royal Vapery stocks top vape kits like the Vaporesso XROS, Geek Bar Pulse, and SKE Crystal reliable, leak-proof, and beginner-friendly.
Pair with our e-liquids for perfect performance. Free UK delivery on orders over £20. Vaping should be enjoyable, not a hassle. With these fixes, your vape kit will be back on track.
Happy vaping!
